digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 2N2646, 2n2647 silicon unijunction transistor maximum ratings rating symbol value unit power dissipation (1) p d 300 mw rms emitter current i e(ems) 50 ma peak pulse emitter current (2) i e 2 amps emitter reverse voltage v b2e 30 volts interbase voltage v b2b1 35 volts operating junction temperature range t j -65 to 125 c storage temperature range t stg -65 to 150 c note 1: derate 3mw/c increase in ambient temperature. the total power dissipation must be limited by the external circuitry. note 2: capacitor discharge ? 10f or less, 30 volts or less. electrical characteristics (t a = 25c unless otherwise specified) parameter symbol min typ max unit intrinsic standoff ration (v b2b1 = 10v) (1) 2N2646 2n2647 0.56 0.68 - - 0.75 0.82 - interbase resistance (v b2b1 = 3v, i e = 0) r bb 4.7 7 9.1 kohms interbase resistance te mperature coefficient (v b2b1 = 3v, i e = 0, t a = -55 to 125c) r bb 0.1 - 0.9 %/c emitter saturation voltage (v b2b1 = 10v, i e = 50ma) (2) v eb1(sat) - 3.5 - volts modulated interbase current (v b2b1 = 10v, i e = 50ma) i b2(mod) - 15 - ma emitter reverse current (v b2e = 30v, i b1 = 0) 2N2646 2n2647 i eb2o - - 0.005 0.005 12 0.2 a peak point emitter current (v b2b1 = 25v) 2N2646 2n2647 i p - - 1 1 5 2 a valley point current (v b2b1 = 20v, r b2 = 100ohms) (2) 2N2646 2n2647 i v 4 8 6 10 - 18 ma base-one peak pulse voltage (3) 2N2646 2n2647 v ob1 3 6 5 7 - - volts note 1: intrinsic standoff voltage: = v p -v f /v b2b1 , where v p = peak point emitter voltage , v b2b1 = interbase voltage, v f = emitter to base one junction diode drop ( 0.45v @ 10a). note 2: pw 300s, duty cycle 2% to avoid internal heating due to interbase modulation which may result in erroneous readings note 3: base one peak pulse voltage is used to ensure minimum pulse amplitude for applications in scr firing circuits and other types of pulse circuits. sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20121019
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 2N2646, 2n2647 silicon unijunction transistor available non-rohs (standard) or rohs compliant (add pbf suffix). available as ?hr? (high reliability) screened per mil-prf- 19500, jantx level. add ?hr? suffix to base part number. sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20121019
|